Separate names with a comma.
It's best to do both cylinders together as you will often find that you can swap some of shims around to get the required clearance. It also saves...
I just looked up the owners handbooks for these bikes. I have a whole load of then saved as PDFs.
I'm not so sure that they are. They appear to be physically similar but from Ducati's own specifications the outputs vary from model to model :...
Sorry, none in these sizes.
Whistling is usually due to the visor not fitting snugly to the helmet shell. Check where it seals against the visor openings for any gaps.
No problem Paul. I see you've PM'd me and I've sent you the link.
I have an article on overhauling the Mikuni carbs but it is too big to post on here. It relates to the Suzuki GS1000 but the carbs are the same,...
It adds fuel, there is a separate starter jet. I have attached a PDF with the carb parts shown.
Long shot maybe, but these bikes are prone to carb icing. In cold weather the carbs can ice up, blocking internal fuel/air ways and the bike runs...
I couldn't agree more.
With the P8 both pickups are the same. If you swap their connectors round it won't fire.. It's easy to check
Does it fire at all with Easi Start? I'm not familiar with the SP3, what ECU does it use?
Yes, I rebuilt a 500SL from pile of bits about 5/6 years ago. I only kept it for a couple of years because it was such a pain to ride, with the...
Chris, DPR8EA-9 plugs are NOT iridium. There a standard old style plug but with a larger gap, the EA means a 19mm reach with a 'special' design'...
I've always run these engines with NGK DPR8EA-9 plugs. They are pre-gapped at 0.9mm (37.5 thou). The coils are well up to firing the bigger gap...
The carbed Monster has 2 independent ignition systems, one for each cylinder. it is very easy to swap the coils and ignition modules although not...
From memory, the choke cable ran alongside the air box at the top frame member
Notchy gear change is usually due to clutch drag
Well that's news to me. I had assumed that it was the same set up as on the carved Supersports which were definitely a float operated switch. Will...
The fuel level sensor is just a switch that turns on the light when the fuel gets down to certain level. If you measure resistance across the 2...
