Separate names with a comma.
Ha Ha! It's in even better nick now than when Morris had it.
NOW SOLD [ATTACH] I have decided to sell my Ducati 907ie which I have owned for the last 10 years. These bikes are becoming increasing rare and...
Looks worn to me.
The town where I live has a Lidl and every week they have wee booklets advertising next week's offers. Last week there was supposed to be a load...
Sorry, my mistake. It should be TB1215. I have edited the post to reflect this.
There is a rubber gasket plus ThreeBond 1215 should be applied on the face between each lobe and at each corner at the lobe outers.[ATTACH] [ATTACH]
There is no side stand or ignition on light on the ST series. 3 is the Neutral light, 4 the fuel warning light, 5 the indicators tell tale and 7...
You may find this diagram easier to follow.
Bottom A on a bass guitar is 36Hz, much lower than the belt tension.
I was doing the belts on a 1200MTS last week and had the same problem and ended up with a blister on my thumb. The old app worked well but the new...
No problem.
Black is ground, Yellow is tail light and red/grey is stop light. [ATTACH]
The ECU will switch the fuel pump relay on for a few seconds at ignition on then turn it off again. This pressurises the fuel lines. The relay...
I've never used these cam lock tools myself. Too mean to buy one when I can hold the pulley in place with a pair of long nosed pliers with the...
No, you're not imagining it. At the timing position the vertical cylinder inlet valve is fully open and the camshaft wants to turn due to the...
Unfortunately it doesn't need to start to bend the valves. Just turning it over is enough and the metallic noise you heard suggests some degree of...
There is a small grub screw at the wheel side of each wheel bottom. It is peened over and very difficult to remove. I drilled them out of mine so...
Now that I see the videos I do remember seeing it before but I can't remember where. I must have been at least 10 years ago.
Seems like a nice idea but I doubt if it's road legal. I think lights must be constant not flashing.
Various voltages gave been quoted for alternator output but from my own experience, approx 15 Vac per 1000 rpm. So about 30 Vac at 2000 rpm. Also...
