Separate names with a comma.
Here we go again! The heat shrink I used fits all the way round just like the £25 bits of plastic and can't fall off for the same reasons.
I did the same thing to the twistgrip on my Supersport with heat shrink tubing. I posted it on the forum at the and a few people poo-pooed the...
So it's to cool me down. I'll remember that for future occasions when the rain come on as I'm preparing to leave.
That happens to me all the time. The rain usually comes on between me getting the bike out of the garage then coming out of the house after...
And just in case you have mixed up the wires from the pickups. This is the horizontal : [ATTACH] And this is the vertical: [ATTACH] And if you...
I first met up with Norrie when he rode with us to WDW12 on a 1098. Amazing guy for his age. He manages that Pikes Peak Multi no problem and he's...
I usually apply copper grease every time I fit a new sprocket.
Looked like rust to me :D
Yes. 4 valves means smaller valves for the same port area, smaller valves means less weight so less inertia. So for a conventional valve spring...
8mm fit all 2 valve Ducati engines from the 750SS of 1972 right until the Dual Spark engine was introduced around 2003(?) when the moved to 7mm....
I must confess; I meant to check mine during the winter after your warning but I forgot. :blush: So I had a look at it this morning and it's fine...
The pre-cat part no. is 574.1.045.1A. The exh with the cat I listed above is used for all ST4s models from '02 to '05.
I don't think that's the part no. Harry. That is the EU emissions compliance homologation number. The part number should be on the back.
FYI. The part no on that silencer says it's from a 2002 on ST4s: "574.1.057.1B Silenziatore Sx. L.H. silencer" So definitely has a cat, as...
I just recieved a link to update the table. I hope I did it right :worried:
The cats came with the ST4s in 2002.
A few years ago I had an ST4s and repacked the Termis with Accoustafil. It was very easy but it does expand with heat to fill the cavity so...
I did a valve service on an ST2 last week and now have an 8mm shim at 7.05 available, but can't add it to the database myself.
When the dot on the lower pulley aligns with the line on the RH engine cover the horizontal cylinder is at TDC at the beginning of the firing...
I have 2 pairs of Voyager GTX. The first pair are about 18 years old now. I sent them back for refurbishing that were about 9 years old then a...
