Separate names with a comma.
Hi been thinking of selling mine for a while. Thinking of something a bit smaller. Not sure where you are. Am in New milton down south. If you are...
Don’t know how old you bike is. Clutch baskets tend to get notches worn into them where the plates engage . After a while the plates do not travel...
I bought a cheap original seat and took it to a seat place ( actually a boat upholstery ) had it made how I wanted to take out the sloping up at...
Watched the video which was a good idea but saw this one when it ended and thought it might be more what you want. [MEDIA]. Maybe make a guide and...
Not sure whether you have seen my reply below. Will take guard. Just let me know how you want to be paid. Cheers
It does the job. Certain amount of wobbling going on but as long as the road isn’t to rough it’s ok!
Can’t tell from photo,s! Can’t see why it would not .Let me know how you want payment and I will pay you. Thank you.
Hi can be fitted without radiator guard? All fixings with it? If so will take it. Thanks
Heat and shock. Heat up the threaded side with hot air gun. If you can hammer a slightly bigger torx bit into the head for a tight fit all the...
Had same problem . Found noise cancelling headphones Bose Q20 works really well. Takes out all the thrummy base tones and leaves a very acceptable...
Speedy cables restore car gauges. Website seems to say gauges in general. Might be worth a call.
Noticed someone on eBay doing a complete service service for the sach shock for £170.
Have got many spares from motorapido and service has been good.
My thinking is if you supply voltage From a battery and they heat up then probably fault lies elsewhere. If it does not then you need to get new...
Have seen plenty of posts that would indicate they are a common failure. Can you supply the grips with voltage to see if they work?
Cooling fan predominantly come on 97-100 go of 102 ish. Most likely 3 of those thing are one issue. Erratic tick and running rich, Hot and...
Heath Robinson would be proud. Did it come up with a fault code?
I put a conversion kit ( just a sleeve with the taper for mop which slips over shaft and is held on with grub screw) on a 350w bench grinder and...
Have collection of screens . Just tell me where to chop.
Pretty sure that would do it . You can get a daylight MOT. Just ask them to verify.
