Separate names with a comma.
Well.. I have now fitted a flange / carrier off another V4 and.. Fits perfectly, everything aligns and the nut threads all the way home. I...
Moto Rapido have confirmed the spacer I have is the correct width (9mm) as are both of the nuts (17mm) the AEM nut is every so slightly over...
Thanks @andyb - currently the sprockets & chain alignment are good. I’m hoping to borrow another V4 flange later and test fit it.
Does anyone have a standard V4 flange they can measure?
This is the sprocket carrier / flange - does anyone recognise the brand? I have tried to measure the depth of this but its a little tricky, I...
This is the spacer between the carrier and the hub bearing [ATTACH] [ATTACH] [ATTACH]
I have tried a different nut I already had (for a V4) and the issue is the same [ATTACH]
Hoping someone can shed some light on this.. The nut holding the sprocket carrier on my V4 Panigale does not thread onto the shaft enough. I am...
These are now sold @Ducbird - please lock the thread
Now sold @Ducbird :upyeah:
Price drop to £950
Dainese Back Protector Comfortable and can be worn under leathers or a jacket £75 with free UK Shipping [ATTACH] [ATTACH]
Panigale 1199R Marchesini Front & Rear Wheels (Also fit 1299 + V4) Removed from my 1199R but will fit other 1199 models (Standard & S) Will also...
Some tasty food on offer :)
[ATTACH]
Weather looking iffy but hopefully some of you can make it down tomorrow
(And fixes the limp mode)
Yes, that’s what mine has been doing. I didn’t realise for quite a while that the exhaust servo being missing was the cause.. I would suggest a...
The servo eliminators don’t work I’m afraid.. you have to get a remap
