Separate names with a comma.
No, the headers aren't the same diameter/length.
Season finally started. [ATTACH]
Yes, like these: https://www.ebay.com/itm/293056009439 73740207A
"..such as Marchesini forged magnesium wheels, ---, Brembo monobloc callipers.." Yeah, no.
I've seen both sides cracked. [ATTACH]
I've seen multiple and it's always the same spot, caused by (a) monkey wrenching the pinch bolts.
Or this: [ATTACH]
It's not. The connector is near the headstock on the right side.
Those are for the silencer connection. The vertical header does not have a gasket on the joint. [ATTACH]
Yes. Horizontal cylinder header part nrs: 2003 749 (shallow sump, grey swingarm): 57010731B 2006 749 (shallow sump, black swingarm): 57010731B...
Stock exhausts are the same for both swingarms, only the engine type matters. No.
You have the right to disagree but it's a fact that the mirror stays for the R's and facelift base/S models have the same dimensions :) I've had...
All the R noses are the "wide" type, same as facelift base/S.
If you mean the early base/S plastic fairing there aren't carbon supports available for it, only magnesium.
Same cast wheels on all 749/999 base/S models.
Fans are one speed only. First fan kicks in at 102 degrees, second at 103 or 104 degrees.
I have been using a Corse slipper since 2017. Surflex alu plates with white lithium grease, Molykote M77 on the ramps. Had to replace the spider...
Ducati does not list the bearings for a single sided hub. You're supposed to replace the hub completely, but obviously the bearings can be...
Not sure if that's 100% accurate but Speed Carbon definitely has the old CM Composit molds for their carbon parts.
Most likely this. The fairing is wrong for a facelift bike. Also the text on the side fairing should be silver, not black. Aftermarket fairing,...
