Separate names with a comma.
Baldrick is a well known Guzzi mechanic. Give him a shout and see who he suggests. I guess it also depends where you are as Baldrick is South...
Have you tried asking the company you bought them from? Hoping some one else had the same issue?
Thanks all for your help so far although I think i must have missed something or need to eliminate some items? My friend lent me 3 CPS sensors...
Thanks Derek, mine is a three pin version not the two pin. Its the IAW 16 ECU. I am going to speak to the head technician for the ECU repair and...
Thanks all for your help. So today I had another go with lots of reading, youtube search on the cps Magneti morelli sen813. Looking on the casing...
Sometimes it pays to read, read and double check... My mate baldrick suggested it was the CPS. I had tested it and had 680 ohms at the two...
Are you sure Pete? it is not colored black? I have to print off the wiring diagram again. I did try as one of the methods to unplug all the items...
I cleaned my tank out with chemicals and kept it. I prefer to repair mine than buy another one that i dont know. Only option is maybe a new one...
I would also check other connections or the pump. Could it be the pump is blocked or on its way out drawing more currant and causing this issue? Vinny
Old Rider thanks, I am a bit stumped at the moment. I thought it was the ecu as I followed the ducati manual and checked many items. I found that...
are you able to get access to a Reader that can check the codes. That way you would know what the alarm code is then fix it.
I would start with basics filter etc. Then check tps and work from there. Hope you fix it
Thanks for ecutesting. They were very good, had some issues with the website but they picked it up, could not repair it and sent it back. I took...
thanks
Chris, thanks I am based in Croydon. I have looked at second hand but am wary of spending out when I could put it torward a new or replacement. Vinny
does the factory manual help you? I only have the 916 but it does go into detail
could you approach the exhaust manufacturers to see if they can supply the part?
Has anyone used www.carmo.nl in the Netherlands for ecu repairs? or any other suggestions for fixing the ecu?
Hi i have a 916 so the fittings are similar although the unions on yours are different. If this was my bike I would remove the allen screws if...
I found the issue, workshop manual says to test pin 35 and 17 or 34 with the shrowd off. undo the single screw. this had 12volts and tested the...
