Separate names with a comma.
I have to agree with others, its the riding position and body. Maybe you could get a friend to film take photos to see how you are sitting on the...
It sounds as though you might be on the right track though,if you replaced the fuel filter and it did not suffer for a short while then it could...
My experience is with the standard speck battery. In my 916 I have used yuasa acid filled which used to last two years before I plugged in a...
i am getting worried.... using the workshop manual. tested both relays. good. tested the ignition switch. all good. tested crank position sensor....
Denzil and all thanks for your help and suggestions so far. I have removed the relays, tested them with a meter and find two pins with resistance,...
So i guess if i am not getting 12 on pin 1 and 3 then its either the wiring to the ecu or the ecu? I have just tried to change the chip as I had a...
I thought it could be the crank position sensor but reading these dont go wrong often. i have taken it off and put a metal object on the end. this...
Nelly thanks I have made up a lead and tested it from the coils that it is making contact through the coil wires.
Derek thanks I checked and have continuity from the brown white to fuel connector and the coils the wires seem good. I have pulled off all relays...
I have a mechanic friend that can change the belts in a few minutes and have them to the right tension. I took off the covers and he carried on....
Hi I hope you can help me, I have a 916 that has been in the garage for a couple of years now. I diagnosed the datatool alarm caused issues as the...
The fuel pump does run but the bike will not turn over. I wonder if the solenoid is at fault. I have 8 volts with no button pressed and 12 volts...
Hi I hope you can help me. Thanks for the previous posts, I was able to remove the alarm. I thought it was better than having some thing that has...
Thanks
thanks i have a new battery and sorting the starter out. now i have read about the cables. that will be next. vinnychoff
thanks all
Hi all, I have owned my 916 for ten years. Currently off the road as the starter motor failed after a small amount of vibration at 3 to 4k. Once I...
thanks for this post. Mine started to turn over slowly last year, the sprag clutch has gone. Just in the process of getting the engine fixed and...
I would say for that money you are better to have yours repaired. If newman cams are known to do a good job. You would have your own part that is...
I recently put my bike back together as the starter motor failed. Once the starter was back on it would not turn over. I also found that cleaning...
