1200 Brembo M4's & Translogic Quickshifter On My Pikes Peak

Duc2 · Mar 4, 2015

Psy69 said: ↑

Thank you. Oddly There is nothing of that P/N listed for the Ducati fitments that I can see on their site.
Click to expand...

Strange.... But it works a treat.

Duc2 · Mar 4, 2015

Duc2 said: ↑

Strange.... But it works a treat.
Click to expand...

P&H liaised with Translogic on it so I guess they advised it.

bradders · Mar 4, 2015

Noble Ron said: ↑

Thats just confusing Skyhook Multi S Touring is a 2013 bike 4 spark bike.
Click to expand...

MY14 tho...same as mine

bradders · Mar 4, 2015

Boomer said: ↑

Ive had a Translogic QS fitted for a couple of years now

Fitted it myself, not to hard (but I can twirl a spanner) hardest bit was getting the adjustment rod dialled in for the best shift, had to cut the damper rod down slightly and run a die down the thread to give a little more adjustment required. Although mine is fitted in a slightly different position to DUC2 See pic

The push or pull actuator wasn't available when I purchased mine, so I went for the pull actuator which suits the multi gearshift set up for me

You can also alter the ignition kill time using the little electronics box of tricks to get it as quick or slow as you like

But I must say its brilliant, not only for looning around with the sports bike crowd, but very nice when the mrs is on the back short shifting without shutting the throttle off stops all the front suspension diving and stops the occasional helmet crashing and the mrs thinks its a better ride too!!

View attachment 44699
Click to expand...

Is that reverse shift?

bradders · Mar 4, 2015

Boomer said: ↑

Ive had a Translogic QS fitted for a couple of years now

Fitted it myself, not to hard (but I can twirl a spanner) hardest bit was getting the adjustment rod dialled in for the best shift, had to cut the damper rod down slightly and run a die down the thread to give a little more adjustment required. Although mine is fitted in a slightly different position to DUC2 See pic

The push or pull actuator wasn't available when I purchased mine, so I went for the pull actuator which suits the multi gearshift set up for me

You can also alter the ignition kill time using the little electronics box of tricks to get it as quick or slow as you like

But I must say its brilliant, not only for looning around with the sports bike crowd, but very nice when the mrs is on the back short shifting without shutting the throttle off stops all the front suspension diving and stops the occasional helmet crashing and the mrs thinks its a better ride too!!

View attachment 44699
Click to expand...

Is that reverse shift?

Boomer · Mar 5, 2015

bradders said: ↑

Is that reverse shift?
Click to expand...

No Standard shift Bradders

Psy69 · Mar 6, 2015

Innovative strain gauge and set up method means they can cater for bikes with smaller linkage arrangements. They are new to the scene but those who have had them seem to be impressed.

HealTech Electronics Ltd. – Smart Tech for your Ride – QuickShifter easy (new)

Psy69 · Mar 6, 2015

Sensor added directly to the linkage fastener fastened by a longer supplied bolt.

1200 Brembo M4's & Translogic Quickshifter On My Pikes Peak

Duc2 Thread Starter New Member

Duc2 Thread Starter New Member

bradders Elite Member

bradders Elite Member

bradders Elite Member

Boomer Senior Member
Subscriber

Psy69 Well-Known Member

Psy69 Well-Known Member

Useful Searches

1200 Brembo M4's & Translogic Quickshifter On My Pikes Peak

Duc2 Thread Starter New Member

Duc2 Thread Starter New Member

bradders Elite Member

bradders Elite Member

bradders Elite Member

Boomer Senior Member Subscriber

Psy69 Well-Known Member

Psy69 Well-Known Member

Boomer Senior Member
Subscriber