Project Misery

bradders · Aug 24, 2018

cookster said: ↑

Well where the disc was hard against the outer edge on the caliper, I undid the front axel and moved the wheel over a wee bit in situ then came to the conclusion that I need a very small spacer on the left hand side of the spindle nut to hold the wheel over just enough for the discs to centralize in the calipers, next step to get a spacer made. I asked Steve (baylissboy) what he did on his k3, said exactly what I've just discribed plus sent me loads of pics of where to put the spacer.
Click to expand...

No idea if of use, but I have some wheel spacers from several bikes, incl gixer in garage somewhere

cookster · Aug 24, 2018

@bradders it's the really thin one on the left of the front axle on the outside of the fork leg I need matey

baylissboy · Aug 25, 2018

Happy to help @cookster ......you'll find that brake set up awesome....well worth the hassle!!!

deleteduser211220 · Aug 26, 2018

If you know the size of the spacer you need, I will make a couple for you.

Project Misery

bradders Elite Member

cookster Thread Starter A.R.COOK - MOTORCYCLE MOTS
Subscriber

baylissboy Well-Known Member
Subscriber

deleteduser211220 Guest

Useful Searches

Project Misery

bradders Elite Member

cookster Thread Starter A.R.COOK - MOTORCYCLE MOTS Subscriber

baylissboy Well-Known Member Subscriber

deleteduser211220 Guest

cookster Thread Starter A.R.COOK - MOTORCYCLE MOTS
Subscriber

baylissboy Well-Known Member
Subscriber